All non-options that does not start with '@' are taken to indicate a file,
directory,
or similar that is should be added to the ISO image. Directories are added recursively and content is subject to filtering options.
One requirement is that the VISO file must start with one of the --iprt-iso-maker-file-marker options. Which of the options you use will dictate the quoting and escaping rules used when reading the file. The option takes the image UUID as an argument.
<
!-- grammar had no start -->
%*s---- start of lock stack for %p %s - %u entr%s ----
%s: Error changing mode: %Rrc
%s: Error changing modification time: %Rrc.
%s: Error closing hardlinked file copy: %Rrc
%s: Error creating I/O stream for file: %Rrc
%s: Error creating directory: %Rrc
%s: Error creating file: %Rrc
%s: Error creating symbolic link: %Rrc
%s: Error opening file '%s' for reading (hardlink target): %Rrc
%s: Error setting times: %Rrc
%s: Error writing out file: %Rrc
%s: error to read it into memory: %Rrc
'(' required to start ATTLIST enumeration
---- start of deadlock chain - %u entries ----
?? Unknown error ??
A Machine Check Error has occurred. Please check the system eventlog for additional information.
A Microsoft Software Installer error was encountered.
A base error occurred.
A communications error with the smart card has been detected. Retry the operation.
A continuous VCP code's current value is greater than its maximum value. This error code indicates that a monitor returned an invalid value.
A database error has occurred.
A decoding error has occurred.
A directory service error has occurred.
A disk error occurred during a read operation.
A disk error occurred during a write operation.
A general error was detected when attempting to acquire the BIOS's response to a Physical Presence command.
A general remote communication error occurred.
A local error has occurred.
A network adapter hardware error occurred.
A network error interrupted the operation.
A network error occurred while sending data to another node in the cluster. The number of bytes transmitted was less than required.
A non-empty line was encountered in the INF before the start of a section.
A non-recoverable error occurred during a database lookup.
A path does not start with a root specification.
A path is not relative (start with root),
expected an relative path.
A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
A protocol error occurred.
A read operation failed while converting the drive. The drive was not converted. Please re-enable BitLocker.
A remote procedure call (RPC) protocol error occurred.
A required TPM measurement is missing. If there is a bootable CD or DVD in your computer,
remove it,
restart the computer,
and turn on BitLocker again. If the problem persists,
ensure the master boot record is up to date.
A security checking error has occurred.
A security package specific error occurred.
A syntax error occurred at position %1!d!
A syntax error occurred trying to evaluate a query string
A system-level error occurred while verifying trust.
A table does not start on a long word boundary.
A write operation failed while converting the drive. The drive was not converted. Please re-enable BitLocker.
ANS.1 internal error 1.
ANS.1 internal error 2.
ANS.1 internal error 3.
ANS.1 internal error 4.
ANS.1 internal error 5.
ASN1 Certificate encode/decode error code base. The ASN1 error values are offset by CRYPT_E_ASN1_ERROR.
An HRESULT could not be translated to a corresponding Win32 error code.
An IO error occurred transmitting information to the TPM.
An addressing error occurred in the RPC server.
An attempt was made to start a lead link display adapter when the chain links were not started yet.
An encoding error has occurred.
An error occured
An error occured while NDIS tried to map the file.
An error occurred because the checksum field in a DDC/CI message did not match the message's computed checksum value. This error implies that the data was corrupted while it was being transmitted from a monitor to a computer.
An error occurred because the field length of a DDC/CI message contained an invalid value.
An error occurred copying the file
An error occurred during a seek operation.
An error occurred during encode or decode operation.
An error occurred in sending the command to the application.
An error occurred in the ABIOS subsystem.
An error occurred in the ACPI subsystem.
An error occurred in the Scripted Diagnostic Managed Host.
An error occurred in the WX86 subsystem.
An error occurred in the software installation data in the Active Directory.
An error occurred when interacting with PowerShell runtime.
An error occurred when running a PowerShell script.
An error occurred while attempting to compress or extract the data.
An error occurred while communicating with the TBS.
An error occurred while communicating with the TPM
An error occurred while communicating with the TPM.
An error occurred while deserializing a stream of cluster data.
An error occurred while installing the directory service. For more information,
see the event log.
An error occurred while performing an operation on a cryptographic message.
An error occurred while reading from a stream of data. An unexpected number of bytes was returned.
An error occurred while reading or writing to a file.
An error occurred while receiving data from the device on the I2C bus.
An error occurred while transmitting data to the device on the I2C bus.
An error occurred while writing to a stream of data. The required number of bytes could not be written.
An error was encountered while processing an XML digital signature.
An event was unable to invoke any of the subscribers
An extended error has occurred.
An internal Monitor Configuration API error occured.
An internal Monitor Configuration API error occurred.
An internal cluster error occurred. A call to an invalid function was attempted.
An internal cluster error occurred. A cluster database transaction was attempted while a transaction was already in progress.
An internal cluster error occurred. Data was not properly initialized.
An internal cluster error occurred. There was an attempt to commit a cluster database transaction while no transaction was in progress.
An internal communications error has been detected.
An internal error caused an operation to fail.
An internal error caused this operation to fail.
An internal error has been detected,
but the source is unknown.
An internal error has occurred.
An internal error occured
An internal error occurred in a remote procedure call (RPC).
An internal error occurred.
An internal error was detected.
An internal software error has been detected.
An operations error occurred.
An unexpected card error has occurred.
An unexpected error occurred during COM+ Activation.
An unexpected error occurred.
An unexpected internal error was detected
An unexpected network error occurred.
An unknown error occurred while processing the certificate.
An unrecognized error code was returned from a layered component.
Application verifier has found an error in the current process.
Assembly Protection Error : The catalog for an assembly is missing.
Assembly Protection Error : The catalog for an assembly is not valid,
or does not match the assembly's manifest.
Assembly Protection Error : The public key for an assembly was too short to be allowed.
Assembly Protection Error : Unable to recover the specified assembly.
Attribute list declaration doesn't start and stop in the same entity
BitLocker Drive Encryption cannot be applied to this drive as currently configured because of Group Policy settings. The certificate you provided for drive encryption is self-signed. Current Group Policy settings do not permit the use of self-signed certificates. Obtain a new certificate from your certification authority before attempting to enable BitLocker.
BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on fixed data drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on operating system drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on removable data drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
BitLocker Drive Encryption detected bootable media (CD or DVD) in the computer. Remove the media and restart the computer before configuring BitLocker.
BitLocker Encryption cannot be applied to this drive because of conflicting Group Policy settings. When write access to drives not protected by BitLocker is denied,
the use of a USB startup key cannot be required. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
COM+ was unable to talk to the Microsoft Distributed Transaction Coordinator
CPUM internal processing error #1.
CPUM internal processing error #2.
Cannot restore this virtual machine because an item read from the saved state data is not recognized. Delete the saved state data and then try to start the virtual machine.
Cannot restore this virtual machine because the saved state data cannot be read. Delete the saved state data and then try to start the virtual machine.
Cannot restore this virtual machine to the saved state because of hypervisor incompatibility. Delete the saved state data and then try to start the virtual machine.
Cannot start a new logon session with an ID that is already in use.
Cannot start more than one instance of the specified program.
Comment doesn't start and stop in the same entity
Content error in the external subset
Copy Protection Error - DVD CSS Authentication failed.
Copy Protection Error - DVD session key not established.
Copy Protection Error - The current DVD's region does not correspond to the region setting of the drive.
Copy Protection Error - The drive's region setting may be permanent or the number of user resets has been exhausted.
Copy Protection Error - The given sector does not have a valid CSS key.
Copy Protection Error - The read failed because the sector is encrypted.
Couldn't find end of Start Tag %s
Couldn't find end of Start Tag %s line %d
DNS server unable to interpret format.
DNS zone has no start of authority (SOA) record.
Data error (cyclic redundancy check).
Detected an error in element content
Device will not start without a reboot.
Directory Services could not start because of the following error: %1.
Either NetAccessDel or NetAccessAdd returned an error code.
Either the IOPMVideoOutput::COPPCompatibleGetInformation,
IOPMVideoOutput::GetInformation,
or IOPMVideoOutput::Configure method failed. This error is returned when the caller tries to use a COPP specific command while the video output has OPM semantics only.
Either the IOPMVideoOutput::COPPCompatibleGetInformation,
IOPMVideoOutput::GetInformation,
or IOPMVideoOutput::Configure method failed. This error is returned when the caller tries to use an OPM specific command while the video output has COPP semantics only.
Element content declaration doesn't start and stop in the same entity
Element declaration doesn't start and stop in the same entity
Enable the Trusted Platform Module (TPM).
End of range is before start of range
Entity declaration doesn't start and stop in the same entity
Error %Rrc opening '%s'.
Error %Rrc read %#zx bytes at offset %#RX64
Error %Rrc writing %#zx bytes at offset %#RX64 to '%s'
Error :
Error accessing the OLE registry.
Error adding '%s' (VFS): %Rrc
Error adding '%s': %Rrc
Error adding directory '%s' (VFS recursive): %Rrc
Error adding directory '%s': %Rrc
Error adding file '%s' (VFS recursive): %Rrc
Error adding file '%s': %Rrc
Error adding symbolic link '%s' (->
%s): %Rrc
Error allocating %#x + 1 bytes for storing content
Error allocating %#x bytes for storing content
Error allocating temporary storage for tim sort: need %lu bytes
Error applying transforms. Verify that the specified transform paths are valid.
Error closing directory '%s': %Rrc
Error configuring path builder: %Rrc
Error convering --group '%s' into a number: %Rrc
Error convering --owner '%s' into a number: %Rrc
Error converting UTF-8 to UTF-16 string.
Error creating an event semaphore for used with asynchronous reads.
Error creating digest algorithm calculator.
Error creating digest for '%s': %Rrc
Error creating temorary file: %Rrc
Error creating temporary crypto store
Error creating unique tmp file.
Error decrypting payload
Error deleting '%s': %Rrc
Error drawing view
Error due to lack of resources.
Error due to problem in ASN.1 decoding process.
Error due to problem in ASN.1 encoding process.
Error encrypting payload
Error enumerating all processes in the session.
Error extracting RSA from the public key.
Error extracting a public key from the certificate.
Error formatting an extension.
Error getting a data from the extension.
Error getting extensions from the certificate.
Error getting the file mode.
Error growing papMoreExpectedPolicySet array (cur %u,
depth %u)
Error growing subtrees pointer array from %u to %u elements
Error growing subtrees pointer array to %u elements
Error in assigning inner IP address to intiator in tunnel mode.
Error in the DLL
Error in tree
Error loading crypt32.dll
Error loading type library/DLL.
Error naming directory '%s': %Rrc
Error naming file '%s': %Rrc
Error naming symlink '%s' (->
%s): %Rrc
Error occurred reading the application file
Error occurred writing to the application file
Error opening '%s' (inside '%s'): %Rrc
Error opening '%s'.
Error opening directory '%s' (VFS recursive): %Rrc
Error opening directory '%s' (inside '%s'): %Rrc
Error opening directory '%s': %Rrc
Error opening file '%s' (VFS recursive): %Rrc
Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
Error opening the ApiPort LPC object.
Error opening the stub process for revalidation when vboxdrv is opened by the VM process.
Error opening the stub process thread for revalidation when vboxdrv is opened by the VM process.
Error parsing attribute name
Error performing inpage operation.
Error processing Cert payload
Error processing Certificate Request payload
Error processing Delete Payload
Error processing Hash payload
Error processing ID payload
Error processing KE payload
Error processing NatOA payload.
Error processing Nonce payload
Error processing Notify payload
Error processing Proposal payload
Error processing SA payload
Error processing Signature payload
Error processing Transform payload
Error processing VendorId payload
Error processing error payload
Error reading %#RX32 bytes at %#RX64 (dir): %Rrc
Error reading %#zx bytes destination (written ISO) block #%#x at %#RX64: %Rrc
Error reading %#zx bytes source (virtual ISO) block #%#x at %#RX64: %Rrc
Error reading 32KB from generic boot image '%s': %Rrc
Error reading FAT into memory
Error reading LX header at %RTfoff: %Rrc
Error reading Mach-O header at %RTfoff: %Rrc
Error reading VDS content at %RX64 (LB %#x): %Rrc
Error reading a certificate in PEM format from BIO.
Error reading boot catalog at block #%#RX32: %Rrc
Error reading directory '%s': %Rrc
Error reading directory at %#RX64 (%#RX32 / %#RX32): %Rrc
Error reading file set descriptor
Error reading first FAT sector
Error reading line #%u: %Rrc
Error reading sector at offset %#RX64 (anchor volume descriptor pointer): %Rrc
Error reading the El Torito volume descriptor at %#RX32: %Rrc
Error reading the system area (0..32KB): %Rrc
Error reading the volume descriptor #%u at %#RX32: %Rrc
Error refs definitions
Error refs definitions '%s'
Error removing directory '%s': %Rrc
Error removing regular file '%s': %Rrc
Error removing special file '%s': %Rrc
Error removing symbolic link '%s': %Rrc
Error resolving crypt32.dll APIs
Error seeking to start of '%s': %Rrc
Error setting name '%s' on '%s': %Rrc
Error setting parent &
name on directory '%s' to '%s': %Rrc
Error setting parent &
name on file '%s' to '%s': %Rrc
Error setting rock ridge name for directory '%s' to '%s'
Error setting rock ridge name for file '%s' to '%s'
Error setting rock ridge name for symlink '%s' to '%s'
Error starting unpack process '%s': %Rrc
Error type '%s' is not exported by type library '%s'
Error validating datatype %s
Error validating list
Error validating value %s
Error waiting for process: %Rrc
Error while calculating a digest for a PKCS #7 verification operation.
Error while characters translation (unicode and so).
Error while parsing UUID string.
Error writing to '%s': %Rrc
Error: unable to register NS with prefix=%s and href=%s
Failed to enable VMXON-in-SMX bit while enabling VT-x through the MSR.
Failed to enable and lock VT-x features.
Failed to enable rock ridge: %Rrc
Failed to set VMXON enable bit while enabling VT-x through the MSR.
Failed to start application because it is either a library application or an application proxy
Fatal error during installation.
Fatal error in the recompiler cpu.
Fatal error in virtual hardware.
GIM internal processing error #1.
GIM internal processing error #2.
GIM internal processing error #3.
Hash read error at %#x: %Rrc (cbRead=%#zx)
IIS intrinsics not available. Start your work with IIS.
If an MM error is returned which is not defined in the standard FsRtl filter,
it is converted to one of the following errors which is guaranteed to be in the filter.
If you have upgraded VirtualBox recently,
please make sure you have terminated all VMs and upgraded any extension packs. If this error persists,
try re-installing VirtualBox.
Image Verification Failure: Error allocating memory for authenticode signature data.
Image Verification Failure: Error allocating memory for section headers.
Image Verification Failure: Error allocating memory for state data.
Image Verification Failure: Error determining the file length.
Image Verification Failure: Error reading authenticode signature data.
Image Verification Failure: Error reading file for hashing.
Image Verification Failure: Error reading image headers.
Image Verification Failure: Error reading section headers.
Image Verification Failure: Internal error in signature parser.
Indicating that the VM has been resumed and that the thread should start executing.
Internal EM error caused by an unknown warning or informational status code.
Internal ISO maker error: Expected path to start with root slash.
Internal SVM processing error no 1.
Internal SVM processing error no 2.
Internal SVM processing error no 3.
Internal SVM processing error no 4.
Internal SVM processing error no 5.
Internal VMX processing error no 1.
Internal VMX processing error no 2.
Internal VMX processing error no 3.
Internal VMX processing error no 4.
Internal VMX processing error no 5.
Internal error - this should never happen.
Internal error at %s:%d
Internal error in the VFS chain code.
Internal error in the X.
Internal error in the X.509 certificate path building and verification code.
Internal error in the X.509 code.
Internal error in the lock validator or related components.
Internal error no.
Internal error no. 2.
Internal error no. 3.
Internal error no. 4.
Internal error no. 5.
Internal error obtaining the GVMM instance.
Internal error on define aggregation of %s
Internal error parentRef definitions '%s'
Internal error with type library '%s': no 'have'
Internal error: start element not found
Internal processing error # in the PDM device code.
Internal processing error #1 in CFGM.
Internal processing error #1 in SSM code.
Internal processing error #1 in TRPM.
Internal processing error #1 in page access handler code.
Internal processing error #1 in the DBGF register code.
Internal processing error #1 in the DBGF stack code.
Internal processing error #1 in the GVMM code.
Internal processing error #1 in the HM code.
Internal processing error #1 in the I/O port code.
Internal processing error #1 in the IEM code.
Internal processing error #1 in the MMIO code.
Internal processing error #1 in the PDM Thread code.
Internal processing error #1 in the PGM physial page mapping code.
Internal processing error #1 in the switcher code.
Internal processing error #1.
Internal processing error #2 in SSM code.
Internal processing error #2 in TRPM.
Internal processing error #2 in the DBGF register code.
Internal processing error #2 in the DBGF stack code.
Internal processing error #2 in the GVMM code.
Internal processing error #2 in the HM code.
Internal processing error #2 in the I/O port code.
Internal processing error #2 in the IEM code.
Internal processing error #2 in the MMIO code.
Internal processing error #2 in the PDM Thread code.
Internal processing error #2 in the PGM physial page mapping code.
Internal processing error #2.
Internal processing error #3 in SSM code.
Internal processing error #3 in TRPM.
Internal processing error #3 in the HM code.
Internal processing error #3 in the I/O port code.
Internal processing error #3 in the IEM code.
Internal processing error #3 in the MMIO code.
Internal processing error #3 in the PGM physial page mapping code.
Internal processing error #3.
Internal processing error #4 in the HM code.
Internal processing error #4 in the IEM code.
Internal processing error #4 in the PGM physial page mapping code.
Internal processing error #4.
Internal processing error #5 in the HM code.
Internal processing error #5 in the IEM code.
Internal processing error #5.
Internal processing error #6 in the IEM code.
Internal processing error #7 in the IEM code.
Internal processing error #8 in the IEM code.
Internal processing error #9 in the IEM code.
Internal processing error in the DWARF code.
Internal processing error in the HM init code.
Internal processing error in the PGM dynmap (r0/rc).
Internal processing error in the PGM handy page allocator.
Internal processing error in the PGM physcal page handling code related to MMIO/MMIO2.
Internal processing error in the PGM physical handler code.
Internal processing error in the PGM physical page mapping code dealing with MMIO2 pages.
Internal processing error in the RTMp code.
Internal processing error in the critical section code.
Internal processing error in the debug module reader code.
Internal processing error in the page allocator.
Internal processing error in the page pool code.
Internal processing error related to guest mappings.
Internal processing error the CodeView debug information reader.
Internal processing error while merging status codes.
Invalid delete of start of authority (SOA)
It is an error for both '%s' and '%s' to be specified on the same type definition
It is an error for both 'length' and either of 'minLength' or 'maxLength' to be specified on the same type definition
It might not be possible to determine the end keyframe time when the start keyframe is reached.
Last error = %u,
cbData = %u (in %u)
Last error = %u,
cbInfo = %u (in %u)
Log service encountered a log stream with no restart area.
Log service encountered an error when attempting open a log container.
Log service encountered an error when attempting to read from a log container.
Log service encountered an error when attempting to write to a log container.
Log service encountered an invalid log restart area.
Log service has attempted to read or write backward past the start of the log.
MSDTC was unable to load the dtc proxy dll.
MSDTC was unable to read its configuration information.
Malformed --%s,
path must start with a slash: %s
Malformed --chmod,
path must start with a slash: %s
Manifest Parse Error : A CDATA section was not closed.
Manifest Parse Error : A comment was not closed.
Manifest Parse Error : A declaration was not closed.
Manifest Parse Error : A name contained an invalid character.
Manifest Parse Error : A name was started with an invalid character.
Manifest Parse Error : A semi colon character was expected.
Manifest Parse Error : A single or double closing quote character (' or "
) is missing.
Manifest Parse Error : A string literal contained an invalid character.
Manifest Parse Error : A string literal was expected,
but no opening quote character was found.
Manifest Parse Error : A string literal was not closed.
Manifest Parse Error : An Invalid character was found in text content.
Manifest Parse Error : Duplicate attribute.
Manifest Parse Error : Element was not closed.
Manifest Parse Error : End element was missing the character '>
'.
Manifest Parse Error : End of file reached in invalid state for current encoding.
Manifest Parse Error : End tag was not expected at this location.
Manifest Parse Error : Expecting whitespace or '?'.
Manifest Parse Error : Incorrect syntax was used in a comment.
Manifest Parse Error : Internal error.
Manifest Parse Error : Invalid at the top level of the document.
Manifest Parse Error : Invalid character for decimal digit.
Manifest Parse Error : Invalid character for hexadecimal digit.
Manifest Parse Error : Invalid syntax for an xml declaration.
Manifest Parse Error : Invalid unicode character value for this platform.
Manifest Parse Error : Invalid version number.
Manifest Parse Error : Invalid xml declaration.
Manifest Parse Error : Missing equals sign between attribute and attribute value.
Manifest Parse Error : Missing parenthesis.
Manifest Parse Error : Multiple colons are not allowed in a name.
Manifest Parse Error : Only one top level element is allowed in an XML document.
Manifest Parse Error : Parameter entities cannot be used inside markup declarations in an internal subset.
Manifest Parse Error : Required white space was missing.
Manifest Parse Error : Switch from current encoding to specified encoding not supported.
Manifest Parse Error : System does not support the specified encoding.
Manifest Parse Error : The character '>
' was expected.
Manifest Parse Error : The following tags were not closed: %1.
Manifest Parse Error : The name 'xml' is reserved and must be lower case.
Manifest Parse Error : The namespace prefix is not allowed to start with the reserved string xml.
Manifest Parse Error : The standalone attribute cannot be used in external entities.
Manifest Parse Error : The standalone attribute must have the value 'yes' or 'no'.
Manifest Parse Error : Unbalanced parentheses.
Manifest Parse Error : Unexpected end of file.
Manifest Parse Error : Whitespace is not allowed at this location.
Manifest Parse Error : XML document must have a top level element.
Memory tag error occurs :%p
Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire.
Name translation: Unable to resolve completely,
only the domain was found.
No DOS v1.0 bootsector either - unexpected start of FAT: %.3Rhxs
No attached driver. The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return this error when no driver was configured to be attached.
No attempts to start the service have been made since the last boot.
No available ports on the hub. This error is returned when a device is attempted created and/or attached to a hub which is out of ports.
No error message provided
No superior reference has been configured for the directory service. The directory service is therefore unable to issue referrals to objects outside this forest.
Not ISO? Unable to recognize volume descriptor signature: %.5Rhxs
Not enough free disk space to start Data Collector Set.
Notation declaration doesn't start and stop in the same entity
OSS Certificate encode/decode error code base
PI declaration doesn't start and stop in the same entity
Page hash read error at %#x: %Rrc (cbScratchRead=%#zx)
Process Verification Failure: Error allocating memory.
Process Verification Failure: Error allocating state memory or querying the system32 path.
Process Verification Failure: Error closing image file handle.
Process Verification Failure: Error determining the full path of System32.
Process Verification Failure: Error opening image file.
Process Verification Failure: Error query virtual memory information.
Process Verification Failure: Error query virtual memory mapping name.
Process Verification Failure: Error querying debug port.
Process Verification Failure: Error querying image information.
Process Verification Failure: Error querying process name.
Process Verification Failure: Error querying thread information.
Process Verification Failure: Error reading image file header.
Process Verification Failure: Error reading process memory for comparing with disk data.
RNG Internal error,
start found in element
RNG internal error trying to compile %s
RTFsIsoMkImport error %Rrc: %N
Read error at offset 0: %Rrc
Restart the current instruction.
Restart the current instruction. For testing only.
RtDvmFmtMbrReadExtended: Error reading extended partition table at sector %#RX64: %Rrc
RtFsFatClusterMap_GetEntry: Error loading entry %u for offFat=%#RX32 (%#64RX32 LB %#x): %Rrc
RtFsFatClusterMap_GetEntryEx: Error loading entry %u for offFat=%#RX32 (%#64RX32 LB %#x): %Rrc
RtFsIsoImport/Rock: Error reading continuation record at %#RX64: %Rrc
Runtime error opening '%s' for %s
Runtime error reading from file '%s'
Runtime error seeking in file '%s'
Runtime error truncating file '%s'
Runtime error writing to file '%s'
START
START RING BUF
SetMonitorColorTemperature()'s caller passed a color temperature to it which the current monitor did not support. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
Since the server was offline,
the called function was unable to complete the usage check.
Some error in application program
Start %d end %d
Start has no children
Start instruction stepping (debug only).
Start more than one children
Start of literal
Start tag doesn't start and stop in the same entity
Start tag expected,
'<
' not found
SyncPage modified the PDE. This is an internal status code used to communicate back to the #PF handler that the PDE was (probably) marked not-present and it should restart the instruction.
Syntax error - Cannot read symbol value,
it is a set-only symbol.
Syntax error - Command not found.
Syntax error - Couldn't satisfy a request for a specific result type.
Syntax error - Invalid command name.
Syntax error - a type conversion failed.
Syntax error - an argument or subargument contains nothing useful.
Syntax error - an undefined variable was referenced.
Syntax error - buggy parser.
Syntax error - expected binary operator.
Syntax error - function not found.
Syntax error - incorrect argument type.
Syntax error - invalid numeric value.
Syntax error - invalid operation attempted.
Syntax error - invalid operator usage.
Syntax error - numeric overflow.
Syntax error - out of regular heap memory.
Syntax error - out of scratch memory.
Syntax error - the argument does not allow a range to be specified.
Syntax error - the specified function is not a function.
Syntax error - too few arguments.
Syntax error - too many arguments for static storage.
Syntax error - too many arguments.
Syntax error - unbalanced parenthesis.
Syntax error - unbalanced quotes.
Syntax error - you hit a debugger feature which isn't implemented yet.
Syntax error - you hit a debugger feature which isn't implemented yet. (Feel free to help implement it.).
The %hs encountered an error while applying power or reading the device configuration.
The BIOS failure prevented the successful execution of the requested TPM operation (e.g. invalid TPM operation request,
BIOS communication error with the TPM).
The BitLocker startup key or recovery password cannot be found on the USB device. Verify that you have the correct USB device,
that the USB device is plugged into the computer on an active USB port,
restart the computer,
and then try again. If the problem persists,
contact the computer manufacturer for BIOS upgrade instructions.
The DSA operation is unable to proceed because of a DNS lookup failure.
The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.
The Filter Manager had an internal error from which it cannot recover,
therefore the operation has been failed. This is usually the result of a filter returning an invalid value from a pre-operation callback.
The IOPMVideoOutput::Configure function returns this error code if the passed in sequence number is not the expected sequence number or the passed in OMAC value is invalid.
The IOPMVideoOutput::Configure method cannot enable HDCP because the display adapter's HDCP hardware is already being used by other physical outputs.
The IOPMVideoOutput::Configure method cannot enable the specified output protection technology because the output's screen resolution is too high.
The IOPMVideoOutput::GetInformation and IOPMVideoOutput::COPPCompatibleGetInformation methods return this error if the passed in sequence number is not the expected sequence number or the passed in OMAC value is invalid.
The KDC was unable to generate a referral for the service requested.
The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.
The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log.
The MSDTC transaction manager was unable to pull the transaction from the source transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process,
the two machines cannot find each other by their NetBIOS names,
or the support for network transactions is not enabled for one of the two transaction managers.
The MSDTC transaction manager was unable to push the transaction to the destination transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process,
the two machines cannot find each other by their NetBIOS names,
or the support for network transactions is not enabled for one of the two transaction managers.
The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
The NtCreateFile API failed. This error should never be returned to an application,
it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.
The PKU2U protocol encountered an error while attempting to utilize the associated certificates.
The RDP protocol component %2 detected an error in the protocol stream and has disconnected the client.
The Terminal Server security layer detected an error in the protocol stream and has disconnected the client.
The Transaction Manager was unable to be successfully initialized. Transacted operations are not supported.
The VMMR0.r0 module version does not match VBoxVMM.dll/so/dylib. If you just upgraded VirtualBox,
please terminate all VMs and make sure that neither VBoxNetDHCP nor VBoxNetNAT is running. Then try again. If this error persists,
try re-installing VirtualBox.
The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.
The application directory partition operation failed. The domain controller holding the domain naming master role is down or unable to service the request or is not running Windows Server 2003.
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
The calculation is unable to proceed because the existing SHA-1 thread has already encountered an error.
The called function was unable to do a usage check on the subject.
The caller of SetMonitorColorTemperature specified a color temperature that the current monitor did not support. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
The chain of linked adapters is not ready to start because of an unknown failure.
The chain of virtual hard disks is inaccessible. There was an error opening a virtual hard disk further up the chain.
The directory service encountered an error parsing a name.
The directory service is missing mandatory configuration information,
and is unable to determine the ownership of floating single-master operation roles.
The directory service was unable to allocate a relative identifier.
The directory service was unable to initialize the subsystem that allocates relative identifiers.
The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.
The drive you are attempting to lock does not have any key protectors available for encryption because BitLocker protection is currently suspended. Re-enable BitLocker to lock this drive.
The driver trying to start is not the same as the driver for the POSTed display adapter.
The error specified is not a valid Windows RPC error code.
The floppy disk controller reported an error that is not recognized by the floppy disk driver.
The group is unable to accept the request since it is moving to another node.
The image file %1 is signed,
unable to modify.
The image file %1 is strong signed,
unable to modify.
The inserted CardBus device cannot be started because of a configuration error on %hs.
The interpreter was unable to deal with the instruction at hand.
The iterator's start position is invalid.
The method failed because an unexpected error occurred inside of a display driver.
The monitor returned an invalid monitor technology type. CRT,
Plasma and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
The non-uniform memory access (NUMA) node settings do not match the system NUMA topology. In order to start the virtual machine,
you will need to modify the NUMA configuration. For detailed information,
see http://go.microsoft.com/fwlink/?LinkId=92362.
The operating system asynchronously destroyed the monitor which corresponds to this handle because the operating system's state changed. This error typically occurs because the monitor PDO associated with this handle was removed,
the monitor PDO associated with this handle was stopped,
or a display mode change occurred. A display mode change occurs when windows sends a WM_DISPLAYCHANGE windows message to applications.
The operating system asynchronously destroyed this OPM video output because the operating system's state changed. This error typically occurs because the monitor PDO associated with this video output was removed,
the monitor PDO associated with this video output was stopped,
the video output's session became a non-console session or the video output's desktop became an inactive desktop.
The probe location array isn't adjacent to the probe enable array.
The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation's error is in the extended data.
The remote endpoint is unable to process the request due to being overloaded.
The replication operation encountered an error with the mail system.
The restart operation failed.
The revocation function was unable to check revocation because the revocation server was offline.
The revocation function was unable to check revocation for the certificate.
The server specified for this replication operation was contacted,
but that server was unable to contact an additional server needed to complete the operation.
The service did not respond to the start or control request in a timely fashion.
The service did not start due to a logon failure.
The service has returned a service-specific error code.
The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured,
the hosting process must be restarted in order to start this service.
The service was disabled on the host. Returned by pfnInit in VBoxService to indicated a non-fatal error that should results in the particular service being disabled.
The shadow page pool was cleared. This is a error code internal to the shadow page pool,
it will be converted to a VERR_PGM_POOL_FLUSHED before leaving the pool code.
The specified TransactionManager was unable to create the objects contained in its logfile in the Ob namespace. Therefore,
the TransactionManager was unable to recover.
The specified xml text was not well-formed. See Extended Error for more details.
The start keyframe might occur after the end keyframe.
The state changed. This is a generic error message and needs a context to make sense.
The stub is unable to get the remote procedure call handle.
The system cannot start another process at this time.
The system firmware failed to enable clearing of system memory when the computer was restarted.
The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted.
The system was unable to register the TypeLib
The task is registered,
but not all specified triggers will start the task.
The task settings do not allow the task to start on demand.
The template for an event definition cannot be found in the resource (error = %1).
The video output cannot enable Analogue Copy Protection (ACP) because it does not support ACP.
The video output cannot enable the Content Generation Management System Analogue (CGMS-A) protection technology because it does not support CGMS-A.
The video output cannot enable the High-bandwidth Digital Content Protection (HDCP) System because it does not support HDCP.
The wait for the Data Collector Set start notification has timed out.
The wait for the Data Collector to start has timed out.
There was an error in a Windows GDI call while converting the DIB to a bitmap.
There was an error in a Windows GDI call while converting the bitmap to a DIB
There was an error starting the Windows Installer service user interface. Contact your support personnel.
There was an error trying to set the smart card file object pointer.
There was an error while deleting the color transform.
There was error [%2] processing the driver database.
This computer was unable to communicate with the computer providing the server.
This is an error mask to convert TPM hardware errors to win errors.
This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server.
This transaction manager encountered a protocol error with another TIP transaction manager.
Type error opening the ApiPort LPC object.
Unable to abort the system shutdown because no shutdown was in progress.
Unable to accomplish the requested task because the local machine does not have any IP addresses.
Unable to allocate more pages from the host system.
Unable to close a serialization handle or a file handle.
Unable to complete the call since there is no COM+ security context inside IObjectControl.Activate.
Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
Unable to contact the global catalog server.
Unable to continue operation because multiple conflicting controls were used.
Unable to convert OLESTREAM to IStorage
Unable to convert a wide character trustee string to a multibyte trustee string
Unable to create file
Unable to decode the ACL in the stream provided by the user
Unable to eject the medium because it is in a drive.
Unable to enlist in the transaction.
Unable to establish existence of the account specified.
Unable to establish trusted of VM process (0).
Unable to establish trusted of VM process (1).
Unable to establish trusted of VM process (2).
Unable to establish trusted of VM process (3).
Unable to establish trusted of VM process (4).
Unable to establish trusted of VM process (5).
Unable to find a core driver package that is required by the printer driver package.
Unable to find a security identifier that corresponds to a trustee string provided by the user
Unable to find a trustee name that corresponds to a security identifier provided by the user
Unable to find a valid security descriptor reference domain for this partition.
Unable to find partition descriptor for a partition map table entry.
Unable to find patch.
Unable to generate a uuid.
Unable to impersonate DCOM client
Unable to impersonate using a named pipe until data has been read from that pipe.
Unable to initialize RPC services
Unable to initialize class cache
Unable to load the medium into the drive.
Unable to locate a usable DMG file within the XAR archive.
Unable to locate image for boot catalog entry #%u: %s
Unable to locate imported symbol '%s%s%s' for module '%s'
Unable to lock a region of a file.
Unable to lock the media eject mechanism.
Unable to log you on because of an account restriction.
Unable to make text memory writeable (hardening).
Unable to map view of file for OLE service
Unable to marshal an interface that does not support IPersistStream
Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
Unable to obtain server's security context
Unable to obtain the Windows directory
Unable to obtain the client's security blanket
Unable to obtain user info from an access token
Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
Unable to open or close the inject/eject port.
Unable to open the access token of the current thread
Unable to open the access token of the server process
Unable to open the character translation table file.
Unable to open the host interface due to a sharing violation .
Unable to open the host interface.
Unable to open the network connection profile.
Unable to parse the CodeView debug information.
Unable to parse the XML in DMG file.
Unable to perform a security operation on an object that has no associated security.
Unable to perform requested operation.
Unable to read bootsect
Unable to read from or write to the database.
Unable to read volume descriptor #%u
Unable to remove the file to be replaced.
Unable to resolve completely,
a referral to another forest is generated.
Unable to retrieve status about the transport.
Unable to retrieve the drive status.
Unable to retrieve the slot status.
Unable to seal text memory again to protect against write access (hardening).
Unable to set a discretionary ACL into a security descriptor
Unable to set or reset a serialization handle
Unable to set required authentication level for update request
Unable to start Data Collector Set because there are too many folders.
Unable to start VM execution due to an invalid guest state.
Unable to start VM execution.
Unable to switch due to invalid guest state.
Unable to switch due to invalid host state.
Unable to translate all the variables in the default environment due to codeset issues (LANG / LC_ALL / LC_CTYPE).
Unable to unload the media.
Unable to update the password. The value provided as the current password is incorrect.
Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
Unable to update the password. The value provided for the new password does not meet the length,
complexity,
or history requirements of the domain.
Unable to use the range for a large page.
Unexpected cURL error configure the proxy.
Unhandled error %#lx (%lu)
Unhandled error %u
Unhandled error code %d
Unknown error !
Unknown error code %d
Unknown error occurred
Unknown error while reading the guest GDT during shadow table updating.
Unrecognized error occured in the Windows Web Services framework.
Unregistered error message
Virtual machine error occurred attempting the operation
Virtual machine error occurred attempting the operation.
WINS encountered an error while processing the command.
Warning,
the state changed. This is a generic error message and needs a context to make sense.
Was not able to open the support driver. Generic open error used when none of the other ones fit.
Windows was unable to parse the requested XML data.
XML declaration allowed only at the start of the document
XML error at '%s' line %d: %s
XML error while parsing the table of content.
XmlParseInternalSubset: error detected in Markup declaration
XmlRelaxNG: include %s has a start but not the included grammar
You cannot start an application that has been disabled
You must have components in an application in order to start the application
You must restart your computer before continuing with BitLocker Drive Encryption.
__thiscall xml::XmlError::XmlError(struct _xmlError *)
{Unable to Create Paging File}