< RX FRAME ERROR COUNT= < TX FRAME ERROR COUNT= ** MOHState != MOH_STATE_NONE - don't start MOH ** *** start CID *** ******** Start Reconnect (Ignore). ******* -=-=-= Start CAS Detector -=-=-=- ERROR ConvertDtmfActionValToString Wrong Buffer size ERROR ConvertDtmfActionValToString returning FALSE, no DTMF action found ERROR ConvertDtmfActionValToString returning TRUE ERROR in EC_WriteComm: lost %d bytes EndFlash - start monitoring DLG detection GoOffHook - start monitoring DLG detection Got QC2a A2A enable IgnoreCallWaiting: Start timer for %d msec. LAL - Terminate_Test, ERROR Previous modulation wasn't correctly set MOH Not Supported - Start CLID detection ModemColdStart - PSYS-> bV92Supported = %s ModemColdStart - ReadSmartCountryParams flag = %d ModemColdStart - wInitOEMFlags flag = %d, lIscadmus = %d ModemControl(RKCTL_MOH_ENABLE) ERROR = Invalid value %d MohOverrideActionFromSdk - ERROR Invalid DTMFS (%d). Aborting MohOverrideActionFromSdk - ERROR Len is too big (%d). Truncating MohOverrideActionFromSdk - ERROR Overrides from SDK are DISABLED. Aborting N400 exceeded, retx_cnt=0x%x, set error count, lmon will start reneg No error control established OEMFlags-> fPME_Enable = %d RestoreConnection (After Ack):: Start timer for 12sec. RestoreConnection - Ignore (After Nack):: Start timer for 12sec. Send_odp_chk - start V14 Start 1270 Tone detection Start AC Monitoring Start ANS Monitoring Start AnsAm Monitoring Start DC_Calibration Start Event Monitoring Start Monitoring 1650 Tone Detection Start Monitoring Ans Detection Start Monitoring AnsAM Detection Start Monitoring RLSD Start Monitrong Ans off Start Monitrong AnsAM off Start RLSD Monitor Modulation %s Start S1 SB1 Monitoring Start Timer %d ms Start USB1 Monitoring Start set country parameters TONEqDetected:: 2nd - start modulation V42_ans_adp - HDLC detected - start LAPM negotiation V42_ans_adp - synch detected - start MNP negotiation V42_ans_adp - timer expired - start V14 V42_det_ans - ODP detected - start sending ADP V42_det_ans - detection timer expired - start V14 V42_det_ans - synch detected - start MNP negotiation V42_detection (answer mode) - start LAPM negotiation V42_detection (originator mode) - start LAPM negotiation V42_detection (originator mode) - start sending ODP