Enable ecm Enable outdoor %d.%03d | %s: Start Mib Storm index=%3d intrCount=%8d start=%d.%03d duration=%6u ms %s - start classify scan command %s - start scan command total_recv = %d %s : ERROR - timeslot ptr is NULL! %s : Error : Pattern not found %s : Unable to allocate Ath TSF Timer. Maybe, the hw does not support it. %s : Unable to register event handler with MLME! %s : failed to set channel with error code %d %s : failed with error code 0x%X %s : tsftimer_start failed %s Enable Bmode and Disable Turbo for Swan/Nala %s P2P_PROT_SCAN_TYPE_FIND_DEV: wlan_scan_start OK. returned request_id=%d %s P2P_PROT_SCAN_TYPE_FULL: wlan_scan_start OK. returned request_id=%d %s P2P_PROT_SCAN_TYPE_LISTEN : wlan_scan_start OK. returned set_chan_req_id=%d %s P2P_PROT_SCAN_TYPE_SOCIAL: wlan_scan_start OK. returned request_id=%d %s enable %d %s pwr save q: complete the PS frame with error %s scan restart %s scan_start failed %s scan_start number of channels %d %s state=%s error sending fakesleep event=%s %s unable to allocate raw data struct (gen3) %s unable to setup CFEND queue ! %s wlan_assoc_sm_start failed %s: After mini-find, start tx action frame for peer %02x:%02x:%02x:%02x:%02x:%02x. freq=%d %s: Discovery :To start the next social channel only discover. Timeout event=%s arrives %s: ERROR: ieee80211_tsftimer_free returns error %s: ERROR: ieee80211_tsftimer_start returns error=%d %s: ERROR: ieee80211_tsftimer_start returns error=%d %s: ERROR: ieee80211_tsftimer_stop returns error %s: ERROR: unable to register Tx Beacon notify callbacks. %s: Enable MIB counters %s: Enable PTA because rssi (%d) is low. %s: Error %d (0x%08X) in ieee80211_resmgr_vap_start %s: Error %d (0x%08X) in ieee80211_sta_join %s: Error calling iv_vap_info_get. ret=%d %s: Error from ieee80211_vap_register_event_handler=%d %s: Error in adding new p2p channel, reg_class=%d, chan=%d, freq=%d, ieee=%d, flags=0x%x %s: Error in allocating Application IE %s: Error in init. ATH_INFO_NOTIFY %s: Error in parsing IE. Addr=%02x:%02x:%02x:%02x:%02x:%02x %s: Error in parsing IE. SubType=0x%x %s: Error retstatus: already at Max retry. Fail this tx. id=0x%x %s: Error: unable to alloc timer=%d %s: Error: unable to alloc wbuf of type WBUF_TX_MGMT. %s: Error: unable to attach to P2P GO Power Management. Disable CanSleep. %s: Error: wlan_get_bss_chan_list rets error (0x%x). %s: Event O_CHAN_START but unmatched ID: %d != %d %s: Failed to start scan_id=%d priority=%08X status=%d p=%08p rc=%08X %s: Got P2P_DISC_EVENT_ON_CHAN_START event but prot_handle-> set_chan_started is already true %s: HW mic error is detected. %s: Note: OS returned status is OK but there are parsing error in previous frame. %s: ON_CHAN_Start for type=%d. %s: PN gap but no HW mic error is detected, drop this frame. %s: Paused: do not restart timer %s: Scan num_chan=%d, start index=%d. %s: Scan_Start for type=%d. %s: Start Full Scan now. scan_cnt=%d. %s: Start Full Scan. scan_cnt=%d. %s: Start a new scheme %d, bt_period = %dms, bt_dutyCycle = %d, stompType = %d, aggrlimit = %dus %s: Start a new scheme %d, bt_period = %dms, bt_dutyCycle = %d, stompType = %d, aggrlimit = %dus, forcedWeight = 0x%x %s: Start find device Scan. %s: Start scan_id=%d priority=%08X status=%d p=%08p %s: Start the mini-find. Timeout is %d %s: TS Start 0x%x End 0x%x Virt %p, Size %d %s: Tx Descriptor error %x %s: UAPSD SP start %s: Unable to accept new tx since prot_handle-> curr_tx_info (0x%x) is not NULL. %s: Unable to alloc beacon copy buf. Size=%d %s: Unable to allocate RX buffer, refusing ADDBA %s: Unable to allocate buffer %s: Unable to convert GO frequency. op_class=%d, chan_number=%d %s: Unable to create a new coex scheme %d %s: Unable to read eeprom region %s: Unable to read otp region %s: Unable to stop TxDMA Even after Reset, ignore and continue %s: Unable to stop TxDMA. Reset HAL! %s: WARNING: ah_ier_ref_count is 0 and attempting to enable IER %s: called. One-shot NOA stopped. All STA asleep. Restart TBTT timer but %s: called. One-shot NOA. Restart TBTT timer %s: called. Some error in status=0x%x %s: cw_enable %d %s: desired peer not found or not enough time scanning. Start another scan. time_elapsed_msec=%d, orig timeout=%d, curr timeout=%d %s: enable IER %s: enable ps. %s: enable use of protection %s: error from validate_p2p_go_neg_req. %s: error init'ing transmit power %s: error parsing beacon MACADDR=%02X:%02X:%02X:%02X:%02X:%02X %s: error setting board options %s: ieee80211_send_assoc error %d (0x%08X) %s: no Pended Discovery Scan request. enable listen timer %s: re-enable use of short preamble %s: re-enable use of short slot time %s: some disc listen param has changed. Start listening. %s: spectral_scan__enable failed, HW may not be spectral capable %s: start discoverable. New Listen: prd=%d, itvl=%d. Old Listen: prd=%d, itvl=%d. %s: start mini-find for %02x:%02x:%02x:%02x:%02x:%02x since we don't have scan entry. %s: start timer, timeout=0x%x %s: stop old timer. Will restart again with new timeout=0x%x %s: unable to alloc memory for client info. size=%d %s: unable to alloc memory. size=%d %s: unable to allocate channel table %s: unable to allocate device object. %s: unable to attach cipher %s %s: unable to attach hardware HAL status %u %s: unable to collect channel list from hal regdomain likely %u country code %u %s: unable to obtain busy times %s: unable to read EEPROM regcaps %s: unable to read EEPROM version %s: unable to read caps from eeprom %s: unable to reset channel %u (%uMhz) flags 0x%x hal status %u %s: unable to reset hardware hal status %u %s: unable to reset hardware hal status %u (freq %u flags 0x%x) %s: unable to reset hardware hal status %u, %s: unable to restart recv logic %s: unable to set power table %s: unable to set rate table %s: unable to setup PAPRD xmit queue! %s: unable to setup UAPSD xmit queue! %s: unable to setup cipher %s %s: unable to start recv logic %s: unable to update h/w beacon queue parameters %s: unable to update hardware queue %u! %s[%d]: Error entering wow mode %s[%d]: PAPRD enable %d channel %d %s[%d]: PAPRD start at chain %d %s[%d]: paprd_enable %d paprd_done %d Apply %d Ar5416EepromAr9287SetTransmitPower: unable to set power table Ar5416EepromSetTransmitPower: unable to set power table Ar5416EepromSetTransmitPower: unable to set tx power per rate table Ath_tx_edma_tasklet: error processing status Barker RSSI Thresh Enable = %d Cannot enable Green power save when not in HOSTAP mode Cwenable = %d Decrypt Error MFP frame with Subtype 0x%2X ERROR:: paprd failed with error code = %d Enable Cyclic Power Thresh = %d Enable mib counters Error : All the %d pattern are in use. Cannot add a new pattern NON SPECTRAL ERROR datalen=%d pulse_bw_info=0x%x pulse_length_ext=%u pulse_length_pri=%u rssi=%u ext_rssi=%u phyerr=0x%x Set IEEE80211_FEXT_WAPI_ENABLE = %d Start classify scan at %llu Start scan at %llu Unable to add an interface for ath_dev. Unable to setup CAB xmit queue! Unable to setup a beacon xmit queue! Unable to setup xmit queue for BE traffic! Wow :: Error : Cannot convert DIX to 802.11 pattern. Exceeding the pattern size