Cannot be used to start volume
%Error reading DCO name info
%Error reading DM name
%Error reading SD name info
%Error reading SNAP name info
%Error reading plex name info
%Error reading rlink name info
%Error reading rvg name info
%Error reading volume name info
%config_enable_copy: enable config copy #%d
%cs_req_dg_join : failed with error code %d
%dg_join_get_dg : dg_join_read_from_disks failed with error code %d
%dg_join_read_from_disks failed with error code %d
%dg_kernel_dm_changes: start fmr for plex %s
%dg_kernel_plex_changes: start fmr for plex %s
%dg_kernel_sd_changes: start fmr for plex %s
%dg_split : req_vol_commit failed with error code %d
%disk_det_start_fmr: start fmr for plex %s res=%d
%dr_GetArcPathName(): Returning error status 0x%X
%local_alloc: HeapAlloc error =
%local_copystr: HeapAlloc error =
%local_free: HeapFree error =
%local_heap_destroy: HeapDestroy error =
%log_enable_copy: enable log copy #%d
%ncopy_set_disk: enable copy error
%ntdisk_carve_disk3() on DM=%s DA=%s failed with error 0x%X
%s: No plexes in volume %s rid=%s. Start not allowed.
%s: Not allowed to START volume %s rid=%s.
AUTOSTART Volume %s
Attach: atomic copy failed with error %x
Both the plexes of BOOT volume marked with encap. Returning error 0x01
Cannot start %s volume, no valid complete plexes
Cannot start %s volume, no valid plexes
Cannot start %s volume, volume state is invalid
Cannot start RAID-5 volume %s: One column is bad, and the parity may be out-of-date
Cannot start RAID-5 volume %s: Too many bad RAID-5 columns
Clone_snap_volume : call_dco_as failed for volume %s with error code %d
Clone_snap_volume : call_dco_creat failed for volume %s with error code%d
Clone_snap_volume : call_vol_as_dco_log failed for volume %s with error code %d
Commit aborted, restart transaction
CreateFileW(MOUNTMGR_DOS_DEVICE_NAME) failed with error 0x%X. Returning VE_NT_IF_ERROR
Create_log_plex : call_plex_as for plex %s with volume failed with error code %d
Create_log_plex : call_plex_creat failed for %s with error code %d
Create_log_plex : rec_mkname failed for %s with error code %d
Cs_req_dg_clone : dg_clone failed with error code %d
DRL sync: read failed with error %x
DRL sync: read log failed with error %x
Da_enable_copy: enable failed, da %x, copy %d, res %d
Delete sym-link %S from VOL %S failed with error 0x%X
Devintf_remove_disk: start fmr for plex %s
Dg_clone : vol_create failed with error code %d
Dg_clone_resources : IOCTL_DISK_GET_DRIVE_LAYOUT_VM failed for disk %s with error code %d
Dg_clone_resources : da_reonline_all_disks failed with error code %d
Dg_clone_resources : devintf_add_autoconfig failed with error code %d
Dg_clone_resources : devintf_find_devices failed with error code %d
Dg_clone_resources : req_dg_creat failed with error code %d
Dg_clone_resources : vold_disk_open failed for disk %s with error code %d
Dg_clone_resources :rec_mkname for dm creation failed with error code %d
Dg_clone_subdisk : call_sd_as_log for subdisk %s with plex %s failed with error code %d
Dg_clone_subdisk : rec_mkname for basename %s failed with error code %d
Dg_join : dg_join_get_dg failed with error code %d
Dg_join : dg_move_records failed with error code %d
Dg_join : dg_move_records_snap failed with error code %d
Dg_join : dg_split_mark_records_snap failed with error code %d
Dg_move_records : call_dm_creat for the name %s failed with error code %d
Dg_move_records : vold_dm_as_da failed for dm %s with error code %d
Dg_split : dg_move_records failed with error code %d
Dg_split : dg_move_records_snap failed with error code %d
Dg_split : dg_split_mark_records_snap failed with error code %d
Dg_split : dg_split_mark_records_snap is failed with error code %d
Dg_split : dg_split_set_hdr_flag failed with error code %d
Dg_split : dg_split_set_hdr_tdgid failed with error code %d
Dg_split : target dg creatin failed with error code %d
Dg_split : vold_dm_dis_da for dm %s failed with error code %d
Dg_split_set_hdr_flag : priv_change_header for da %s failed the error code is %d
Dg_split_set_hdr_tdgid : priv_change_header for da %s the error code is %d
Dmconfig error %d
Dr_GetArcPathName(): RegOpenKeyExW(adapterKeyName) failed with error 0x%X
Dr_add_mountmanager_point() failed with VOLD error %d
Dr_restore_assoc_vols failed on DG %s for RVG %s with error 0x%X
Dr_restore_create_reps() failed for RVG %s with error 0x%X
Enable failed: %s
Error %x reading partition info on harddisk %s
Error in configuration record
Error in disk group configuration copies
Error in root disk group logs
Error in volboot file
Error parsing the configuration
Error reading DCO name for SNAP %s
Error reading DG Flags for DG %s
Error reading DG GUID
Error reading DG Name
Error reading DG Version
Error reading DM signature for DM %s
Error reading DM state for DM %s
Error reading GUID for VOL %s
Error reading HostID from config
Error reading HotSpare flag for DM %s
Error reading NoHotUse flag for DM %s
Error reading Reserved flag for DM %s
Error reading SD dm_name info for SD %s
Error reading SD dm_offset info for SD %s
Error reading SD length info for SD %s
Error reading SD plex-column info for SD %s
Error reading SD plex-offset info for SD %s
Error reading SNAP volume name for SNAP %s
Error reading TransactionID for DG %s
Error reading VOL drive letter for VOL %s
Error reading VOL length for VOL %s
Error reading VOL type (RAID5/MIRROR) for VOL %s
Error reading band width limit for RLINK %s
Error reading child log volume info for DCO %s
Error reading host name for RLINK %s
Error reading latency high water mark for RLINK %s
Error reading latency low water mark for RLINK %s
Error reading latency protection for RLINK %s
Error reading local IP address for RLINK %s
Error reading local port number for RLINK %s
Error reading mode of replication for RLINK %s
Error reading network protocol for RLINK %s
Error reading parent volume info for DCO %s
Error reading partition count for DM %s
Error reading partition length for DM %s
Error reading partition start for DM %s
Error reading partition style info for DM %s
Error reading partition type for VOL %s
Error reading plex column for plex %s
Error reading plex stripe-width for plex %s
Error reading plex type(mirror,span,RAID5...) for plex %s
Error reading public-offset for DM %s
Error reading rds name for RVG %s
Error reading remote DG name for RLINK %s
Error reading remote IP address for RLINK %s
Error reading remote host name for RLINK %s
Error reading remote port number for RLINK %s
Error reading remote rlink name for RLINK %s
Error reading replicator log protection for RLINK %s
Error reading rvg name for RLINK %s
Error reading rvg name for VOL %s
Error reading rvg pflag for RVG %s
Error reading rvg state for RVG %s
Error reading special flags(B-Boot S-System...) for VOL %s
Error reading srl name for RVG %s
Error reading state for RLINK %s
Error reading transmission packet size for RLINK %s
Error reading version info from SIF file
Error reading volume criticality flag for VOL %s
Failed to create 'servicesvxboot' registry key with error 0x%x
Failed to create 'vxbootASR_FINAL_PHASE' registry key with error 0x%x
Failed to start Tx. Dg: %s, iter: %d, res: %d
Failed to start Tx. Dg: %s, res: %d
Format error in configuration copy
Format error in disk private region
Format error in volboot file
Get_syspart_name() failed with error 0x%X
IMPORT(%s): dg_trans_start failed: %d
IOCTL_MOUNTMGR_CREATE_POINT to link VOL %S with MM_POINT %S failed with error 0x%X
IOCTL_MOUNTMGR_QUERY_POINTS on VOL %S failed with error 0x%X. Probably not installed yet. Going to wait...
IOCTL_MOUNTMGR_VOLUME_ARRIVAL_NOTIFICATION on VOL %S failed 120 times. Last error 0x%X. Returning VE_NT_IF_ERROR
IOCTL_MOUNTMGR_VOLUME_ARRIVAL_NOTIFICATION on VOL %S failed with error 0x%X on attempt %d/120
Ignoring dr_restore() error 0x%X on non-critical DG %s
Invalid partition start for DM %s
Local_heap_create: HeapCreate error =
Log replay for Volume %s: unable to allocate memory
Ncopy_set_disk: enable early return
No plexes found in BOOT volume. Returning error 0x01
Nt_vol_startup() failed with error 0x%X
PL_PFLAG_NOERROR
Partition style neither MBR nor GPT for BOOT volumes. Returning error 0x01
Protocol error with configuration daemon
RV_PFLAG_CHECKSTART
Re-creation of sym-link %S to VOL %S failed with error 0x%X
Rec_mkname() failed on Volume %s with error 0x%X
Resync: read failed with error %x
RtlWriteRegistryValue() failed to write value 'VxVMASRKeys' under 'BackupRestoreASRKeysNotToRestore' registry key with error 0x%x
System error in configuration copy
System error in volboot file
System error occurred in the client
Unable to get cluster size status=0x%x
Unable to get the file system name
Unable to open handle to device
Unable to open mount manager
Unexpected kernel error in configuration update
Vdg_upgrade: restart %s upgrade transaction
Voldreg_openkey(ASR_FINAL_PHASE_REG_SUBKEY) failed with error 0x%X
Voldreg_setstring(%s,%s) failed with error 0x%X
Voldreq(&
req_plex_assoc) failed to associate PLEX %s to VOL %s with error 0x%X
Voldreq(&
req_plex_creat) on volume %s plex %s failed with error 0x%X
Voldreq(req_dco_assoc) failed on DCO %s with error 0x%X
Voldreq(req_dco_creat) failed on DCO %s with error 0x%X
Voldreq(req_dg_creat) failed on DG %s with error 0x%X
Voldreq(req_dm_as_da) failed to associate DM %s to DA %s with error 0x%X
Voldreq(req_dm_creat) failed on DM %s with error 0x%X
Voldreq(req_rep_assoc) failed for RLINK %s with error 0x%X
Voldreq(req_rep_creat) failed for RLINK %s with error 0x%X
Voldreq(req_rvol_creat) failed for RVG %s with error 0x%X
Voldreq(req_sd_as_log)for SD %s(logtype=%d) to PLEX %s failed with error 0x%X
Voldreq(req_sd_as_stripe)for SD %s(type=STRIPE/RAID-5) to PLEX %s failed with error 0x%X
Voldreq(req_sd_assoc)for SD %s(type=PL_CONCAT) to PLEX %s failed with error 0x%X
Voldreq(req_sd_creat) on SD %s failed with error 0x%X
Voldreq(req_snap_assoc) failed on DCO %s with error 0x%X
Voldreq(req_snap_creat) failed on DCO %s with error 0x%X
Voldreq(req_vol_abort) called for DG %s due to fatal error code 0x%X
Voldreq(req_vol_as_dco_log) failed on DCO %s with error 0x%X
Voldreq(req_vol_as_log) failed for SRL %s with error 0x%X
Voldreq(req_vol_assoc) failed for Volume %s with error 0x%X
Voldreq(req_vol_commit) on DG %s failed with error 0x%X
Voldreq(req_vol_creat) failed on Volume %s with error 0x%X
Volume %s: replay error reading log data
Volume %s: unable to read log offset %s length %s
Volume error 0