create_device create_tl_device delete_device delete_tl_device
%s:%d error during authorization %s:%d error during encryption, host: %s %s:%d: Error while initializing authorization module %s:%d: unable to establish connection %sPort (If EPOUTEN=1 and EPINEN=1) Enable Endpoint for control (SETUP) transfers IN and OUT transfers also allowed - unable to initialize heap - unable to open console device A bit stuff error has been detected An unmasked error condition has occurred Bit Stuff Error Flag Bit Stuff Error Interrupt Enable Bit stuff error interrupt disabled Bit stuff error interrupt enabled Bus Turnaround Time-out Error Flag Bus Turnaround Time-out Error Interrupt Enable Bus turnaround time-out error interrupt disabled Bus turnaround time-out error interrupt enabled CRC5 Host Error Flag CRC5 Host Error Interrupt Enable CRC5 host error interrupt disabled CRC5 host error interrupt enabled CService: error listening to port 5475 Data Field Size Error Flag Data Field Size Error Interrupt Enable Data field size error interrupt disabled Data field size error interrupt enabled Error while creating connection to %s:%d Error while sharing device %sPort Error: Cannot enable the service: %s Error: Unable to share specified USB port. Unable to restart USB device. In order to enable it you need to change the Trace Information Level into the Full Trace state for the USB module of the controller in the Configure Diagnostics window which can be opened by clicking on Debug - Configure Diagnostics... menu. No unmasked error condition has occurred Runtime error START Client, %s, %i! START Client, %s:%i, none! USB Error Condition Interrupt USB Error Interrupt Enable USB error interrupt disabled USB error interrupt enabled USB: Unable to connect to Virtual USB Hub Host USB: Unable to find Virtual USB Hub Host USB: Unable to initialize WinSock USB: Unable to start Virtual USB Hub Host Unable to load internal configuration from registry