<
checkBox name=macSpoofing shiftDown=4 _locID=NetworkAdapterEmulated11>
Enable spoofing of &
amp
MAC addresses<
/checkBox>
<
checkBox name=macSpoofing shiftDown=4 _locID=NetworkAdapterSynthetic11>
Enable spoofing of &
amp
MAC addresses<
/checkBox>
<
label name=bootorderHelp shiftDown=4 _locID=Bios2>
&
amp
Select the order in which boot devices are checked to start the operating system.<
/label>
<
radioButton name=autoStartOptions shiftDown=-2 index=1 _locID=OnServiceStart2>
A&
amp
utomatically start if it was running when the service stopped<
/radioButton>
<
radioButton name=autoStartOptions shiftDown=-2 index=2 _locID=OnServiceStart3>
Al&
amp
ways start this virtual machine automatically<
/radioButton>
<
checkBox name=enableVlan _locID=NetworkAdapterEmulated6>
Enable &
amp
virtual LAN identification<
/checkBox>
<
checkBox name=enableVlan _locID=NetworkAdapterSynthetic6>
Enable &
amp
virtual LAN identification<
/checkBox>
<
checkBox name=enableVlan shiftDown=4 _locID=NetworkSwitch8>
Enable &
amp
virtual LAN identification for management operating system<
/checkBox>
<
groupBox name=autoStartDelayBox width=ExtendFull text=Automatic
*Restart the computer to apply the changes.
5There was an error loading the data for this setting.
Automatic Start Action
DAn unexpected error occurred while applying changes to the settings.
Error Applying {0} Changes
Error Removing {0}
Error Rolling back {0}
KTo enable this device, install the Remote Desktop Virtualization Host role service by using Server Manager.
PThe operation succeeded, but you must restart the computer to apply the changes.
The setting change being made requires the drive to first be removed before it can be added back with the requested modifications. We successfully removed the drive, but encountered an error adding the drive back. We then attempted to rollback to the original drive settings, but encountered another error. Thus, the drive still exists but it has no disk.
The setting change being made requires the drive to first be removed before it can be added back with the requested modifications. We successfully removed the drive, but encountered an error adding the drive back. We then attempted to rollback to the original, but encountered another error. Thus, the drive has been removed from the virtual machine.
The setting change being made requires the drive to first be removed before it can be added back with the requested modifications. We successfully removed the drive, but encountered an error adding the drive back. We then rolled back to the original drive settings.
There was an error enumerating the machine's network switches. Make sure the Hyper-V networking service is installed and working properly.