(error
(ERROR) Infinite Loop (loop error id: %d). Printed every 100 times,
occured %d times.
?Error reallocating memory
@heap_check(): ERROR !! Element '%s' [%d] greater than element '%s' [%d]
A Diffie Hellman key agreement failed,
Error 41.
A Firm Item with the specified Firm Code already exists,
Error 22.
A Unit Counter is not available - the en-/decryption cannot be performed,
Error 31.
A connection to the target server with this username is already established. The new login attempt uses a different password,
Error 237.
A general part of the CmDongle memory is damaged (CRC error),
Error 80.
A matching CmActLicense license already exists,
Error 266.
A network error occurred,
Error 100.
A previously attached CmContainer is no longer available,
Error 70.
A required Feature Map is not available,
Error 29.
A required Key Source is not available,
Error 16.
A required Product Item Option is not available,
Error 26.
A severe error occurred in a plug-in,
Error 272.
A specified Product Item TVB control flag does not match the set flag,
Error 50.
A specified Product Item TVB control flag is invalid,
Error 49.
A write command to Flash memory (Firmware) failed because the memory is damaged,
Error 68.
Access over WAN is not allowed for this license,
Error 236.
Access was denied. The set credentials of the Named User License do not match,
Error 132.
An Activation Time is not available - the en-/decryption cannot be performed,
Error 36.
An ECIES decryption failed,
Error 42.
An Expiration Time is not available - the en-/decryption cannot be performed,
Error 34.
An USB reset is required to finish the field update,
Error 222.
An answer request is received before a command request has been previously sent,
Error 199.
An error during blocking a borrowing license has occurred,
Error 226.
An error occurred at the communication level,
Error 95.
An error occurred at the communication level,
Error 96.
An error occurred at the communication level,
Error 97.
An error occurred at the communication level,
Error 98.
An error occurred at the communication level. CmDongle version is too old,
Error 92.
An error occurred at the communication level. CmDongle version is too old,
Error 93.
An error occurred at the communication level. CmDongle version is too old,
Error 94.
An error occurred in the WibuBox data communication (CRC) (15).
An error occurred in the communication with the WibuKey kernel driver (129).
An error occurred:
An exclusive access conflicts with another access from the same client,
Error 213.
An internal error occurred (CmActLicense),
Error 260.
An internal error occurred,
Error 104.
An invalid handle was specified,
Error 106.
Box communication error,
Error 700.
Box communication error,
Error 701.
Box communication error,
Error 702.
Box communication error,
Error 703.
Box communication error,
Error 704.
Box communication error,
Error 705.
Box is in restricted mode,
Error 706.
CmContainer Entry not found,
Error 200.
CmContainer not found,
Error 201.
CmDongle has no CTSB functionality,
Error 123.
CmDongle has no FSB functionality,
Error 122.
CmDongle has not the correct OEM ID to execute the command,
Error 124.
CodeMeter License Server is not a network server,
Error 111.
CodeMeter License Server not found,
Error 101.
CodeMeter License Server start is still pending,
Error 238.
CodeMeter Restriction is active - requested functionality is not allowed,
Error 713.
CodeMeter cannot bind CmActLicense to this machine,
Error 268
CodeMeter cannot find the property required for the CmActLicense binding,
Error 271.
CodeMeter cannot open the file containing the Firm Item template for CmActLicense,
Error 269.
Command processing terminated because an unexpected exception occurred,
Error 307.
Command still pending,
Error 235.
Constraint %d (irregular surface): Irregular surface does not start or end with infinite x-coordinate. Ignoring constraint.
Constraint %d (irregular surface): Start point of irregular surface must have smaller y-coordinate than end point. Ignoring constraint.
Constraint %d (stencil quality zones): Stencil quality zone %d contains a self contact point at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (stencil quality zones): Stencil quality zone %d contains a self intersection at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (stencil stretching zones): Stencil stretching zone %d contains a self contact point at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (stencil stretching zones): Stencil stretching zone %d contains a self intersection at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (surface quality zones): Surface quality zone %d contains a self contact point at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (surface quality zones): Surface quality zone %d contains a self intersection at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (surface quality zones): Surface quality zone %d has less than 3 vertices (possibly after error corrections). Ignoring this polygon but it may lead to erroneous results.
Constraint %d (surface stretching zones): Surface stretching zone %d contains a self contact point at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (surface stretching zones): Surface stretching zone %d contains a self intersection at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (surface stretching zones): Surface stretching zone %d has less than 3 vertices (possibly after error corrections). Ignoring this polygon but it may lead to erroneous results.
Constraint %d (surface): Surface %d contains a self contact point at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (surface): Surface %d contains a self intersection at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Constraint %d (variant): Polygon %d is a variant of polygon %d but already belongs to another variant or has itself variants. Error can not be corrected. Terminating.
Due to an overload of CodeMeter License Server the license access could not be processed in time and thus has been rejected,
Error 309.
Error %d,
level %d: '%s'
Error [no linear solver loaded]
Error [no pricer loaded]
Error [no ratiotester loaded]
Error [not initialized]
Error [unspecified]
Error during decrypting file
Error in addressing the Extended Memory (28).
Error is sent by CodeMeter chip,
Error 194.
Error is sent by CodeMeter chip,
Error 198.
Error is sent from USB controller to host if BlockStatus is 0xff or 0x00,
Error 197.
Error is sent from USB controller to host if protocol version problems appear,
Error 195.
Error is sent from USB controller,
if a request could not be sent to CodeMeter chip,
Error 192.
Error is sent from USB controller,
if an answer could not be received from CodeMeter chip,
Error 193.
Error n.a. (30).
Error n.a.(106).
Error n.a.(107).
Error n.a.(108).
Error n.a.(109).
Error n.a.(110).
Error n.a.(111).
Error n.a.(112).
Error n.a.(113).
Error n.a.(114).
Error n.a.(115).
Error n.a.(116).
Error n.a.(117).
Error n.a.(118).
Error n.a.(119).
Error n.a.(120).
Error n.a.(121).
Error n.a.(122).
Error n.a.(123).
Error n.a.(124).
Error n.a.(125).
Error n.a.(126).
Error n.a.(127).
Error n.a.(31).
Error n.a.(42).
Error n.a.(43).
Error n.a.(44).
Error n.a.(45).
Error n.a.(46).
Error n.a.(47).
Error n.a.(48).
Error n.a.(49).
Error n.a.(50).
Error n.a.(51).
Error n.a.(52).
Error n.a.(53).
Error n.a.(54).
Error n.a.(55).
Error n.a.(56).
Error n.a.(57).
Error n.a.(58).
Error n.a.(59).
Error n.a.(60).
Error n.a.(61).
Error n.a.(62).
Error n.a.(63).
Error n.a.(68).
Error n.a.(69).
Error n.a.(70).
Error n.a.(71).
Error n.a.(72).
Error n.a.(73).
Error n.a.(74).
Error n.a.(75).
Error n.a.(76).
Error n.a.(77).
Error n.a.(78).
Error n.a.(79).
Error n.a.(80).
Error n.a.(81).
Error n.a.(82).
Error n.a.(83).
Error n.a.(84).
Error n.a.(85).
Error n.a.(86).
Error n.a.(87).
Error n.a.(88).
Error n.a.(89).
Error n.a.(90).
Error n.a.(91).
Error n.a.(92).
Error n.a.(93).
Error n.a.(94).
Error n.a.(95).
File not found,
Error 240.
For CmActLicense the CodeMeter License Server must run as a service,
Error 267.
Handle between CodeMeter client and server is inconsistent,
Error 127.
Heap_check(): ERROR !! (No conversion function for error display available)
Increased access reliability (triple mode redundancy) for this license does not work,
if no matching license on another CodeMeter License Server is available,
Error 130.
Internal CmContainer error,
Error 254.
Internal Error occurred,
Error 312.
It is not permitted to use this CmActLicense with this operating system version,
Error 270.
It is not permitted to use this license on a virtual machine,
Error 273.
No CmDongle locking/unlocking needed,
Error 207.
No Product Item Option set for creating a creation sequence,
Error 205.
No dynamic data is available for the specified entry,
Error 209.
No error occurred (0).
No error occurred,
Error 0.
No local CodeMeter License Server is started,
Error 110.
No more handles are available,
Error 107.
No more resources available for using encryption with PIO Maximum Encryption Rate,
Error 712. In order to restore full availability CmDongle must be replugged.
No network license information available,
Error 221.
No reserved Firm Item available,
Error 214.
Polygon %d contains a self contact point at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Polygon %d contains a self intersection at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Remote access is not allowed for this license,
Error 239.
Runtime Version at user site is too old,
Error 129.
Some incompatible system software has been found,
Error 274.
Some remote update actions were skipped because an earlier step failed,
Error 234.
Surface hole %d contains a self contact point at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
Surface hole %d contains a self intersection at edges %d and %d. Will try to correct this error but it may lead to erroneous results.
TEncountered unspecified error (error code %d,
level %d). Please contact your software provider.
The API function is not implemented,
Error 304.
The API function is not supported any more,
Error 305.
The Activation Time is underrun - the en-/decryption cannot be performed,
Error 37.
The BOSS and FUM memory are damaged (CRC error),
Error 85.
The BOSS and Firmware memory is damaged (CRC error),
Error 83.
The BOSS memory is damaged (CRC error),
Error 81.
The BOSS,
Firmware and FUM memory are damaged (CRC error),
Error 87.
The CRC value for the Queen Memory is wrong,
Error 60.
The Certified Box Clock (CBC) is not updated by a Certified Time Creation Server,
Error 39.
The CmActLicense license has to be activated again,
Error 263.
The CmActLicense license is invalid,
Error 264.
The CmActLicense license is not yet activated,
Error 261.
The CmActLicense was already activated on this system. It can be activated only once,
Error 262.
The CmContainer is locked,
Error 73.
The CmContainer lock state is not changed,
Error 208.
The CmDongle awaits the restarting of the Encryption Communication Mode,
Error 7.
The CmDongle is damaged. Please contact the support,
Error 74.
The CmDongle is disabled by the Implicit Firm Item,
Error 52.
The CmDongle is executing a previously started command,
Error 64.
The CmDongle is locked,
Error 75.
The CmDongle license is invalid,
Error 225.
The CmDongle memory cannot be written,
Error 63.
The CodeMeter library has not been initialized before first using the API,
Error 313.
The Error Text belonging to the set Error Code %1 is not available,
Error 300.
The Expiration Time is overrun - the en-/decryption cannot be performed,
Error 35.
The FUM memory is damaged (CRC error),
Error 84.
The Firm Access Counter is zero - the en-/decryption cannot be performed,
Error 38.
The Firmware and FUM memory are damaged (CRC error),
Error 86.
The Firmware memory is damaged (CRC error),
Error 82.
The Key Source is not defined,
Error 14.
The Maintenance Period is invalid,
Error 79.
The Maintenance Period is missing,
Error 76.
The Maximum Encryption Rate has been reached,
encryption currently not possible,
Error 711.
The Release Date is out of range,
Error 77.
The Release Date is out of range,
Error 78.
The System Time is not set by the CodeMeter Host Service,
Error 88.
The TVB of the CmDongle command sequence is wrong,
Error 5.
The Trailing Validation Block (TVB) is wrong,
Error 47.
The Unit Counter is zero - the en-/decryption cannot be performed,
Error 32.
The Unit Counter would underrun - the en-/decryption cannot be performed,
Error 33.
The Usage Period has expired - en-/decryption cannot be performed,
Error 71.
The access was denied,
Error 231.
The addressed CmContainer has an invalid Firmware Version,
e.g. too old,
Error 224.
The answer from another CodeMeter License Server cannot be received,
Error 103.
The borrowed license at the client side is still enabled,
Error 227.
The calculation for Field Update Activation failed,
Error 216.
The checksum verification failed,
Error 203.
The command failed due to several reasons,
Error 230.
The communication between CmDongle components is wrong,
Error 196.
The communication with the given Certified Time Server failed,
Error 118.
The content of the CmContainer is not correct,
Error 215.
The current operating system is unknown,
Error 119.
The current operation is not supported for universal licenses,
Error 311.
The data area passed to CodeMeter is too small to receive the results of the License Transfer operation. Results can be fetched by sending the same command again with enough memory,
Error 131.
The data area passed to the CodeMeter driver is too small,
Error 112.
The data could not be written to the secure disk partition,
Error 308.
The dongle has sent data in an unexpected format (HID protocol),
Error 780.
The en-/decryption of the communication failed,
Error 302.
The en-/decryption of the sequence failed,
Error 202.
The encryption operation is not permitted,
Error 40.
The exchange of a communication key failed,
Error 109.
The execution of the API function failed,
Error 303.
The given Firm Key is too short,
Error 206.
The given handle is invalid,
Error 114.
The given handle is of wrong type,
Error 115.
The given handle specifies an undefined subsystem,
Error 116.
The given memory address is invalid,
Error 113.
The integrity check on CmDongle failed. This CmDongle is defect and has to be replaced,
Error 730.
The integrity check on CmDongle returned warnings. The CmDongle may become defect in the near future. It is recommended to replace this CmDongle,
Error 731.
The license file cannot be created,
Error 217.
The license memory of CmDongle is not formatted,
Error 99.
The license or the license file (CmFirm.wbc) is not available,
Error 218.
The limit for using the communication function has been reached,
Error 91.
The limit for using the password function has been reached,
Error 90.
The maximum number of Field Updates for a current version is exceeded,
Error 67.
The memory content is damaged to execute a specific operation,
Error 59.
The permanent memory of the CmDongle is too small,
Error 58.
The received CmDongle command sequence is incomplete,
Error 6.
The received CmDongle command sequence is too long,
Error 3.
The received CmDongle command sequence is wrong,
Error 4.
The remote activation license request context file could not be written,
Error 219.
The remote activation license update file could not be read,
Error 220.
The remote update failed due to several reasons,
Error 233.
The request cannot be sent to another CodeMeter License Server,
Error 102.
The request to CodeMeter License Server cannot be encrypted,
Error 301.
The requested function is not supported,
Error 306.
The required subsystem (i.e. library) is not available,
Error 126.
The security module is of wrong type,
Error 121.
The signed list cannot be created,
Error 210.
The size of the answer buffer was too small to execute the command,
Error 8.
The size of the destination table is full,
Error 57.
The specified CmDongle command is not defined,
Error 1.
The specified CmDongle command is not permitted to be used,
Error 2.
The specified Enabling Block is used and cannot be deleted,
Error 51.
The specified Enabling Level is invalid,
Error 56.
The specified Feature Code does not match the used Feature Map,
Error 30.
The specified Feature Code is invalid,
Error 65.
The specified Firm Code is wrong,
Error 27.
The specified Firm Item Reference is damaged (CRC error),
Error 61.
The specified Firm Item Reference is invalid,
Error 21.
The specified Firm Item is disabled,
Error 53.
The specified Firm Update Counter value is wrong,
Error 48.
The specified Key Source is invalid,
Error 15.
The specified Product Code cannot be used,
Error 28.
The specified Product Item Option is invalid,
Error 25.
The specified Product Item Option is not defined,
Error 24.
The specified Product Item Reference is invalid,
Error 23.
The specified Product Item is disabled,
Error 54.
The specified command is not supported for TMR licenses,
Error 134.
The specified command is not supported in the current mode,
Error 66.
The specified data is of invalid format,
Error 20.
The specified data is too short,
Error 18.
The specified data or text is too long,
Error 19.
The specified index is invalid,
Error 55.
The specified option is not defined,
Error 10.
The specified option is not permitted to be used,
Error 11.
The specified or required Key Source is of invalid format,
Error 17.
The specified parameter is invalid,
Error 105.
The specified sequence has a wrong structure,
Error 46.
The specified subcommand is incomplete,
Error 45.
The specified subcommand is not permitted,
Error 44.
The specified subcommand is undefined,
Error 43.
The specified type is not defined,
Error 12.
The specified type is wrong,
Error 13.
The specified value is too large,
Error 9.
The start time of an Usage Period is not reached - en-/decryption cannot be performed,
Error 72.
The system time difference between client and server is too large,
Error 232.
The used Access Mode conflicts with the set Encryption Code Option,
Error 223.
The used Access Mode does not support the command or mode,
Error 69.
The used challenge response token is obsolete,
Error 62.
The used communication mode is not supported in TMR-mode,
Error 135.
The user maximum of the CodeMeter license is reached,
Error 212.
The validation of the given sequence failed,
Error 211.
The version of the connected CodeMeter License Server is too old,
Error 125.
There is no Enabling Block available,
Error 204.
There is no event set,
Error 117.
There is no security module available,
Error 120.
There is not enough memory available in CodeMeter,
Error 108.
This command is invalid for CmActLicense licenses,
Error 265.
Unknown CmContainer error,
Error 255.
Update could not be imported. A previous update is missing,
Error 228.
Update could not be imported. Content of the CmContainer is newer than the update,
Error 229.
Using CmActLicenses is deactivated,
Error 128.
Wrong communication mode with CmDongle is used (see UseUmsDa),
Error 89.
Wrong time conversion is used,
Error 310.