Commun error message with Msdart.dll
"MSDART.DLL was loaded but the entry point DLLRegisterServer was not found.
"
PATH
Msdart.dll has been seen in the following path:
- %windir%\System32\Msdart.dll
- %windir%\System32\dllcache\msdart.dll
SOLUTION
This error can occur if the entrypoints are not properly exported from the module or if the module is not a .DLL or .OCX file.
For now, replace the Msdart.dll file in your %windir%\System32 with the one in %windir%\System32\Dllcache folder. To do this, follow these steps:
- Click Start and type cmd.
- Right-Click on cmd and select “Run as administrator”.
- Type the following command at the command prompt, and then press ENTER:
copy %windir%\system32\dllcache\msdart.dll %windir%\system32
Or- Download msdart.dll from this site and extract it into your
%windir%\system32
folder.
- Note Type y (yes) when you are prompted to overwrite the file.
- Use regsvr32 to register the replaced files.
- Type the following command at the command prompt, and then press ENTER:
regsvr32 %WINDIR%\System32\Msdart.dll
- Type exit and then press ENTER to close the command prompt.